Description
Directions:
-For best results, Adjust pool pH to 7.2 to 7.8 and total alkalinity between 100-150. SCALE & METAL STAIN REMOVER will decrease the pH with use. If total hardness is between 150-300 ppm do not let pH drop below 6.8. For total hardness greater than 300+, visit HidroKlear.com for our saturation index calculator to determine the range for non-scaling/non-staining water balance.
-To remove metal staining: Add 1 qt (946ml) per 20,000- gallon (75,700 liters) of pool water. Premix in a bucket of pool water first, then pour into the deep end of the pool with the filtration system running. Some cloudiness will occur, a normal reaction of the formula with the metals and scaling minerals in the pool. Cloudiness will disappear typically within 24 hours of circulation.
-For pools with stains deep in the pool surface: multiple applications may be necessary, however, follow the directions above and repeat 72 hrs later.
-For pools with constant metal addition from fill water: Add 6-8 oz per 10,000 gallons weekly and use HIDROKLEAR SUPER NATURAL CLARIFIER to maintain crystal clear water.
VERIFIED UNDER NSF 50 STANDARD
MANUFACTURED AND DISTRIBUTED BY HIDROKLEAR LLC
