Description
Directions: If using trichlor or dichlor, calculate the weekly amount of CYA added per pound. Determine your current CYA levels prior to treatment; For accurate test results, use HIDROKLEAR’s POOLTESTING PRO-LAB.
-For best results, reduce total phosphates below 200 ppb, using PHOS GONE prior to treatment with CAT 41
-Clean the filter before using CAT 41. The product will react with cyanuric acid and phosphates in the pool water, causing turbidity. Shake the product vigorously before use.
-Adjust the water: pH (7.2 to 7.8), total alkalinity (80-150), chlorine less than 5 ppm; water temperature above 60°F.
-Pre-dilute the desired dose in a bucket of pool water and disperse the product in front of the return lines. Circulate for 24 hours and vacuum up any remaining precipitate to filter.
-The product will continue to function as long as it is in the filtration system. Unless necessary, avoid backwashing or cleaning the filter for at least 14 days.
-You can add SUPER NATURAL CLARIFIER or BIOFLOCK XTREME
with CAT 41 to speed up turbidity recovery and improve filtration.
Caution: If contact with skin or eyes, rinse with fresh water for 15 to 20 minutes; if you have contact lenses, remove them immediately. Any skin or eye irritation is possible. DO NOT INGEST! In case of ingestion, contact the poison control center, or seek medical attention. Keep the product or label handy.
VERIFIED UNDER NSF 50 STANDARD
MANUFACTURED AND DISTRIBUTED BY HIDROKLEAR LLC
